Product ID:PUROLITE C-100-H ION EXCHANGE RESIN
MSDS Date:01/01/1991
FSC:6810
NIIN:00-873-2554
Status Code:A
MSDS Number: CKYHW

Emergency Phone: 215-668-9090

Info Phone: 215-668-9090

Preparer: NOT PROVIDED.

Cage: 67168

Telephone: 316-343-6653

Cage: 0E5D8

NON-HAZARDOUS INGREDIENTS

LD50 LC50 Mixture:NOT PROVIDED.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE CONTACT LIKE OTHER FOREIGN
BODIES, PARTICLES MAY CAUSE MECHANICAL IRRITATION OF THE EYES.
Explanation of Carcinogenicity:NOT APPLICABLE.
Effects of Overexposure:EYE CONTACT: IRRITATION.
Medical Cond Aggravated by Exposure:EYE CONTACT LIKE OTHER FOREIGN
BODIES, PARTICLES MAY CAUSE MECHANICAL IRRITATION TO THE EYES.

First Aid:EYE CONTACT: FLUSH WITH LARGE AMOUNT OF WATER FOR AT LEAST 15
MINUTES. CONSULT PHYSICIAN IF IRRITATION PERSISTS.

Flash Point:NO FLASH POINT.
Autoignition Temp:=427.C, 800.6F
Autoignition Temp Text:ESTIMA
Extinguishing Media:WATER FOG, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED, PRESSURE DEMAND,
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NOT PROVIDED.

Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE 0C (32F).

Respiratory Protection:NONE
Ventilation:NORMAL ROOM VENTILATION.
Protective Gloves:NONE
Eye Protection:ANSI Z87.1 SAFETY GLASSES.
Other Protective Equipment:NONE.
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
NONE

HCC:N1
NRC/State Lic Num:NOT RELEVANT.
Decomp Temp:Decomp Text:NOT PROVIDED.
Spec Gravity:1.26 (H2O=1)
pH:NOT RELEVANT.
Viscosity:NOT RELEVANT.
Evaporation Rate & Reference:NOT APPLICABLE.
Solubility in Water:INSOLUBLE.
Appearance and Odor:AMBER TO MAHOGANY COLORED SPHERICAL BEADS WITHOUT
ODOR.
Corrosion Rate:NOT PROVIDED.

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH CONCENTRATED NITRIC ACIDS OR STRONG OXIDIZING
AGENTS.
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 220C (428F).
Hazardous Decomposition Products:SO2, SO3, CO, CO2, STYRENE MONOMER,
DIVINYLBENZENE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:UNUSED RESIN MAY BE INCINERATED OR LANDFILLED IN
FACILITIES MEETING LOCAL, STATE AND FEDERAL REGULATIONS. FOR
CONTAMINATED RESIN, THE USER MUST DETERMINE THE HAZARD AND USE AN
APPROPRIATE DISPOSAL MET HOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.